Anti-SARS-CoV-2 Neutralization Antibody Test Kit (Immunofluorescence Assay)

  • Cat.No.:CP04011
  • Format:FICA
  • Reading Time:15 min
  • Size:25T/kit
  • Lead Time:Order now, ship in 3 days
Filter:SARS-CoV-2

Product Introduction

The Anti-SARS-CoV-2 Neutralization Antibody Test Kit (Serum/Plasma/Whole blood) is a quantitative membrane-based immunoassay for the detection of SARS-CoV-2 neutralizing antibodies in serum, plasma and whole blood. The sample is dropped into the sample well, and chromatography is performed under the capillary effect. The SARS-CoV-2 neutralizing antibodies in the sample combined with the fluorescence labeled SARS-CoV-2 spike protein (SP), then spread to the test area, It is captured by coated SP subunit RBDNTD-CTD, to form a complex and gather in the test area (T line). The quality control area is coated with mouse anti-chicken IgY, and the fluorescence labeled chicken IgY is captured to form a complex and aggregate in the C line. If the C line does not show signal, it indicates that the result is invalid, and this sample needs to be tested again.

Product Features

Sensitivity is 98.198% (95%CI: 93.643%, 99.781%) and specificity is 98.252% (95%CI: 96.709%, 99.198%).

Procedure is simple and time saving.

Obtain CE certification.

Automatic results interpretation with printed note.

Suitable for large scale rapid screening.

Test Procedure

Bring the pouch to room temperature before opening. Take the cassette from the sealed pouch and use it within ONE hour.

Place the cassette on a clean and flat surface.

Take the dropper tip to the interface of sample, full fill the capillary with serum or plasma or whole blood sample (approximately 40 μL). Puncture the sealing membrane of tube and insert the dropper into buffer (the capillary ends face down), make sure the dropper is fixed well with tube.

Shake the tube up and down to mix well, be attention of leakage of liquide.

Add 4 drops (approximately 100 μL) of mixture into the sample hole and start the timer. Avoid trapping air bubbles into the sample well.

Take out the ID card and confirm that the ID card matches the batch number of the test cassette.

Turn on the instrument, enter the detection interface and read the ID card. Check whether the test items and reagent information are consistent with the reagent used.

Mode: according to the sample types, choose the matching sample type option on the AFS-1000 immunofluorescent analyzer, please refer to the operation manual of the supporting instrument for details.

Interpretation: immediately insert the detection card into the slot of the applicable instrument at the time of 15 minutes, and click "Instant Test" for quantitative interpretation results.

Testing Results

Immunofluorescent analyzer is used to analyze the test card and provide quantitative test results.

The detection range of this kit is 0.1-600 AU/mL.

Normal reference value: Anti-SARS-CoV-2 Nab ≤ 16 AU/mL.

Kit Components & Storage

Components
1. Test reagent
2. Buffer
3. Desiccant
4. Dropper
5. ID card
Storage
The kit can be stored at 2-30℃ for 18 months. Do not use after the expiration date.

About UNscience

UNscience, a wholly owned subsidiary of Elabscience, specializes in the research and development, production and sale of in-vitro diagnostic reagents. Certified with ISO 13485 and other documents, UNscience sell its products all over the world.

The company has 100,000 grade GMP purification workshop and quality management system, three major technical platforms (Colloidal Gold Immunochromatographic Platform, Fluorescence Immunochromatographic Platform, and Pathological Diagnosis Antibody Platform). UNscience has the independent research and development and production capacity of core raw materials, and has successfully developed 27 POCT immunochromatographic quantitative detection products (colloidal gold and fluorescence), mainly covering cardiovascular and cerebrovascular diseases, kidney diseases, diabetes, infectious diseases, reproductive health, health examination and other.